Terminal block TB22-P16+4B
Article number 6DL1193-6TP00-0BK0
General information
Product type designation Type K0
Product function
● I&M data
Yes; Asset data
Supply voltage
Rated value (DC) 24 V
Current carrying capacity
up to 70 °C, max. 10 A
For process terminals, max. 5 A
Hardware configuration
Formation of potential groups
● New potential group
No
● Potential group continued from the left
Yes
Potential separation
between backplane bus and supply voltage Yes; 4 200 V DC/1 min, type test (due to half the
isolating distance (basic isolation) for ÜK-III re‐
quirement of F technology)
between the potential groups Yes; 1 500 V DC/1 min, type test (SELV / PELV to
functional ground FE)
between process terminals and supply voltage Yes; 4 200 V DC/1 min, type test (safe separation
also exists between the 4 groups within the proc‐
ess terminals; furthermore, a safe separation 120
V AC to 120 V AC between all process terminals
exists, with a test voltage of 3 800 V DC/1 min, type
test)
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
-40 °C
● horizontal installation, max.
70 °C
● vertical installation, min.
-40 °C
● vertical installation, max.
60 °C
Dimensions
Width 22.5 mm
Height 175 mm
Depth 77 mm
Weights
Weight, approx. 78 g
Technical specifications
9.6 Technical specifications of subcomponents of the ET 200SP HA
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD 163
To Next Page
Loading...
