3.3 Accessories for the IO device
The following accessories are available for SIMATIC ET 200SP HA:
Table 3-12 Shield connector
Function Figure
The shield connector allows the low-impedance contacting of
cable shields with minimum installation times.
Table 3-13 Labeling strips
Function Figure
Attach the labeling strips on the modules for plant-specific
labeling of the IO device. The labeling strips can be printed.
The labeling strips can be ordered as accessories (Page 171):
● for thermal transfer printers on a roll
● for laser printers as A4 sheets
Table 3-14 Reference identification labels
Function Figure
The labels enable the reference identification of the IO device
components.
The labels can be ordered as accessories (Page 171):
● for thermal transfer and inkjet printers on a sheet
Table 3-15 Color-coded labels
Function Figure
The color-coded labels can be ordered for specific modules
and for process terminals as accessories (Page 171).
System overview
3.3 Accessories for the IO device
ET 200SP HA Distributed I/O system
System Manual, 08/2019, A5E39261167-AD 21
To Next Page
Loading...
