Table 3-10 Server module and power bus cover
Function Figure
Server module and power bus cover complete the configuration of
the IO device.
The power bus cover is used to protect the power bus contacts.
Table 3-11 Coding element (for terminal block)
Function Figure
There is a mechanical coding element for the ET 200SP HA distrib‐
uted I/O system. This element encodes the type of the installed I/O
module.
You can find additional information on this in the section "Replacing
an I/O module with another type (Page 123)".
Component for the supply voltage
You can find information on suitable components on the Internet (https://
support.industry.siemens.com/cs/ww/en/view/9172884):
Interactive Catalog CA01;
Automation and Drives
System overview
3.2 Basic components of the IO device
ET 200SP HA Distributed I/O system
20 System Manual, 08/2019, A5E39261167-AD
To Next Page
Loading...
