Mounting and Connection
4.3 Connecting Mobile Panel 177
Mobile Panel 177 (WinCC flexible)
Operating Instructions (Compact), Edition 07/2005
4-23
Procedure – plugging the connector
Proceed as follows:
1. Pull back the outer sleeve on the plug connector
2. With the outer sleeve retracted, insert the plug connector into the socket of the terminal
box.
3. Release the outer sleeve
This automatically slides in the direction of the terminal box, thereby interlocking the plug
connector.
Procedure – removing the connector
Proceed as follows:
1. Pull back the outer sleeve on the plug connector
2. With the outer sleeve retracted, pull the plug connector out of the socket of the terminal
box.
If you do not intend to use the Mobile Panel 177 on another terminal box, place the Mobile
Panel 177 securely in the wall holder.
To Next Page
Loading...
