ASCII protocol for RF200
Operating Manual, 11/2016, C79000-G8976-C329-04
41
As an alternative to the ASCII protocol, you can, however, also assign parameters using the
PC with the "3964R" driver. The SIEMENS PC driver "3964R" can be integrated easily in an
application to simplify the creation of the communications functions between a PC as host
and the reader.
You will find the driver on the DVD "RFID Systems, Software & Documentation"
(6GT2080-2AA20) or on the Internet on the Support homepage
(http://www.siemens.com/automation/service&support
).
Connecting cables
With 4-pin power supply connector
The connecting cable (6GT2891-4KH50) is 5 m long.
Special feature of the cable: additional branch for the power supply.
Figure A-1 Connecting cable between PC and RF240R/RF260R/RF290R (RS-232) with 4-pin power supply connector
Suitable power supply unit: e.g. wide-range power supply unit
To Next Page
Loading...
