Siemens SIMATIC IM 151/CPU User Manual

Index
Index-2
ET 200S Interface Module IM 151/CPU
A5E00058783-01
Bus connector, 3-7
Bus faults, remedy, 3-9
C
Cables, 3-7
CAD, B-45
CALL, B-48
CAR, B-35
CAW, B-45
CC, B-48
CD, B-29
CDB, B-49
Changing the PROFIBUS address, 3-6
Chassis ground, Glossary-1
Clock, 5-12, 5-16
Clock memory, 5-16
CLR, B-27
Commissioning, 4-1, 4-7, 8-1, 8-2, 8-6, 8-11,
8-17
Communication, direct, Glossary-3
Components, ET 200S, 1-5
Compression, Glossary-2
Configuration, ET 200S stand-alone, 3-4
Configuration data, accepting, 5-17
Configuration frame, A-1
configuration, normal ID format, A-4
default setting, A-5
structure, A-4
special identifier format, A-2
Configuration software, 1-4
Configuring, 8-1, 8-7, 8-12
IM 151/CPU, 4-2
Consistency, 2-7, 2-8
Consistent data, Glossary-2
Counter, Glossary-2
CPU, Glossary-2
operating system, Glossary-8
CU, B-29
Cycle, OB 1, 5-14
Cycle behavior, 5-17
Cycle extension, through interrupts, 7-5
Cycle time, 7-2, Glossary-2
extending, 7-3
structure, 7-2
Cyclic interrupts, 5-17
D
Data, consistent, Glossary-2
Data block, Glossary-2
Data consistency, 2-7, 2-8
Data exchange, direct, 3-10
Data interchange, sample program, 2-10
Data transfer
principle behind, 2-1
with the DP master, 2-6
DBs, 5-13
DDB (device database) file, 5-2
DEC, B-45
Default addressing, 2-2
Default setting, A-5
for the address area, 2-10
Delay, of the inputs/outputs, 7-5
Device database file, Glossary-2
Diagnosis
module, 4-20
station, 4-14, 4-22
Diagnostic address, 2-7, 4-11, 4-13
Diagnostic buffer, Glossary-3
entry, 4-11
reading out, 4-5
Diagnostic interrupt, 4-23, Glossary-3
OB 82, 5-14
Diagnostic interrupt response time, 7-9
Diagnostics, 4-1, Glossary-3
system, Glossary-11
using LEDs, 4-9
Direct communication, 3-10, Glossary-3
Direct data communication, Glossary-3
Display, LED, 4-9
Distributed I/O device, Glossary-4
DP diagnostic address, 2-7
DP master, Glossary-4
DP slave, Glossary-4
intelligent, 4-2, Glossary-6
DP slave diagnosis, structure, 4-15
DP standard, Glossary-4
DTB, B-46
DTR, B-46
E
Error display, Glossary-4
Error during direct access to I/O, OB 122, 5-15
Error handling via OB, Glossary-4
Error response, Glossary-5
Error/fault, direct access to I/O, OB 122, 5-15
Error/fault responses, 5-15
ET 200, Glossary-5

Siemens SIMATIC IM 151/CPU Specifications

General

Brand	Siemens
Model	SIMATIC IM 151/CPU
Category	Control Unit
Language	English