Siemens SIMATIC Industrial Flat Panel IFP1500

Technical information
7.1 Certificates and approvals
Industrial Flat Panel IFP1500, IFP1900, IFP2200
72 Operating Instructions, 06/2014, A5E31298376-AB
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D or
● Class I, Zone 2, Group IIC or
● non-hazardous locations
FM Approval
Factory Mutual Research (FM) conforming to
● Approval Standard Class Number 3611, 3600, 3810, ANSI/ISA 61010-1
● CSA C22.2 No. 213
● CSA C22.2 No. 1010.1
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4
Ex approval
The following approvals apply to the device in accordance with
● IEC 60079-0:2011 and EN 60079-0:2012
● IEC 60079-15:2010 and EN 60079-15:201
● IEC 60079-31: 2008 and EN 60079-31:2009
valid:
II 3 G
Ex nA IIC Tx Gc
II 3 D Ex tc IIIC T 70 °C Dc IP65
x: Temperature values, see EC design examination certificate
The EC type examination certificates are available on the Internet at:
Technical Support (http://www.siemens.de/automation/csi_en_WW)