Mounting and connecting the HMI device
4.3 Mounting the device
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
41
8. Fasten the cover plate ⑤ to the device with the 2 screws, torque 1.5 Nm. Check that the
seal is sitting correctly.
9. Fasten the cover plate
⑨ from the PRO device product package with 4 M4x12 screws,
torque 1.5 Nm.
Alternatively, you can extend the PRO device by adding an Extension Unit at the bottom.
Read the associated documentation.
To Next Page
Loading...
