Service and maintenance
11.2 Reinstalling the software
SIMATIC IPC647C
114 Operating Instructions, 12/2010, A5E02669337-02
Setting up and formatting partitions
Set up the hard disk partitions after having installed a new hard disk, or to repair faulty
partitions, or to change the partitioning.
In the next dialog box, you can set up the hard disk according to your requirements and add
controllers that are not yet known to the system.
Options Meaning
Drive options (advanced) Further functions are displayed with which you can set up the hard
disk.
Load Driver To add new drivers, for example the driver for RAID.
To Next Page
Loading...
