Service and maintenance
11.1 Removing and installing hardware components
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
107
11.1.10 Replacing the CPU cooler
The CPU cooler installed in the SIMATIC IPC647C uses heat pipes and an additional heat
exchanger.
CAUTION
The CPU cooler may only be removed by authorized technical personnel. Information about
original spare parts for SIMATIC PCs is available on the Internet at: After-sales information
system for SIMATIC PC/PG (
7http://www.siemens.com/asis)
Preparation
1. Disconnect the device from the mains.
2. Open the device.
To Next Page
Loading...
Need help?
General
