Detailed descriptions
16.7 CP 1616 onboard communications processor
SIMATIC IPC647C
212 Operating Instructions, 12/2010, A5E02669337-02
Firmware
This refers to the system program in the SIMATIC NET modules.
Application area for the firmware loader
The firmware loader enables you to reload new firmware releases to SIMATIC NET modules.
It is used for:
● PROFIBUS modules
● Industrial Ethernet modules
● Modules for gateways, for example IE/PB link
Installation
The firmware loader is available on your PG/PC under Windows following the installation of
STEP 7/NCM PC.
Loader files
The firmware loader supports the following file types:
● <File>.FWL
A file form that contains information in addition to the LAD file format, which is displayed
by the firmware loader. The firmware loader can use this information to check if the
firmware is compatible to the device.
● <File>.LAD
A file format that only contains the system program to be loaded into the module.
Read the information provided along with the loader file, for example, in the readme file. This
information is also displayed in the firmware loader when the FWL file is loaded.
To Next Page
Loading...
Need help?
General
