Siemens SIMATIC NET CP 243-1 User Manual

SIMATIC NET – Support and training 09/02
CP 243-1
78 J31069-D0428-U001-A1-7618
Additional support
If you have any further questions on SIMATIC NET products, please contact your
Siemens partner in the branch office responsible for your area.
The addresses are found:
• in our IK PI catalog
• in the Internet
http://www.siemens.de/automation/partner
• in the Interactive Catalog CA01
http://www.siemens.de/automation/ca01
• on the Quickstart CD
Internet
You will find additional detailed information on using the CP described in this man-
ual on the Internet under:
http://www.ad.siemens.de/csi/net
By entering the following Article IDs, you can call up current information (FAQ -
Frequently Asked Questions). At the time of printing of this handbook, the following
articles of relevance for this CP were available:
Article ID Topic / question
2073614 Assigning the subnet masks of IP addresses in the "Subnetting" oper-
ating mode in the IP memory address space
6810459 Settable range of "Keep Alive" time intervals for Industrial Ethernet
CPs (V1.1.0 and higher).
Table 20: Frequently asked questions

Siemens SIMATIC NET CP 243-1 Specifications

General

Brand	Siemens
Model	SIMATIC NET CP 243-1
Category	Computer Hardware
Language	English