Supplementary information
15.6 Communication services
CPU 410-5H Process Automation
System Manual, 09/2014, A5E31622160-AB
255
Options for terminating the communication connection
The following events are available for terminating communication connections:
● You program the termination of the communication connection with FB 66 "TDISCON".
● The CPU state changes from RUN to STOP.
● At POWER OFF / POWER ON
In Step 7, you can read detailed information on the configured connections by selecting
"Module state -> Communication -> Open communication over Industrial Ethernet".
For detailed information on the blocks described above, refer to the
STEP 7 Online Help.
To Next Page
Loading...
Need help?
General
