Siemens SIMATIC RF185C User Manual

Service and maintenance
12.3 Firmware update
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
166 Operating Instructions, 04/2020, C79000-G8976-C512-03
AutoId
status
OPC UA
status
AutoId
text
Error description
-- OpcUa_
BadOutOf
Range /
OpcUa_
Bad
Configura-
tion
Error
-- No or bad configuration data/parameters were transferred.
Possible cause:
• You are accessing a read point that is not configured.
-- BadInvalid
Argument
-- A parameter is missing.
-- BadInvalid
Argument
-- The parameter has an invalid format.
-- BadInvalid
Argument
-- The parameter type is invalid.
-- BadInvalid
Argument
-- Unknown parameter.
--
Bad
--
The command or the frame has an invalid format.
12.3 Firmware update
The following options are available for updating the firmware of the communication modules
and the readers connected to them:
● Using WBM
● Using the TIA Portal (STEP 7 Basic / Professional V15.1 or higher)
In addition, the firmware of the readers connected to the communication module can be
updated. The firmware of the readers is updated using the TIA Portal (STEP 7 Basic /
Professional V15.1 or higher).
These alternative methods are described below.

Siemens SIMATIC RF185C Specifications

General

Brand	Siemens
Model	SIMATIC RF185C
Category	Rfid Systems
Language	English