Service and maintenance
12.3 Firmware update
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
170 Operating Instructions, 04/2020, C79000-G8976-C512-03
7. Select the entry "Functions > Firmware update".
Figure 12-4 Firmware update of the reader
8. In the "Firmware loader" area, click "Browse" and select the update file (*.upd).
9. Select the "Enable firmware after update" check box.
– Note: If the check box is not selected, the new firmware is only activated on the next
startup of the communication module.
10.Click the "Start upgrade" button.
Result: The firmware is updated. The update process is displayed.
To Next Page
Loading...
