Siemens SIMATIC RF185C - Page 206

Syslog messages
B.3 List of Syslog messages
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
206 Operating Instructions, 04/2020, C79000-G8976-C512-03
Message text
{Protocol}: User {User name} has initiated a reset to factory defaults.
Example
WBM: User admin has initiated a reset to factory defaults.
Explanation User has initiated a reset to factory settings.
Severity
Info
Facility local0
Standard
IEC 62443-3-3 Reference: SR 2.12
Software and information integrity
Message text
Configuration integrity verification failed.
Example
Configuration integrity verification failed.
Explanation
Configuration integrity verification failed.
Severity
Error
Facility
local0
Standard
IEC 62443-3-3 Reference: SR 3.4
Session integrity
Message text
{Protocol}: Session ID verification failed.
Example
WBM: Session ID verification failed.
Explanation
Session ID is invalid.
Severity
Error
Facility
local0
Standard
IEC 62443-3-3 Reference: SR 3.8
Restoration of the automation system
Message text
{Protocol}: Firmware {Version} was activated.
Example
WBM: Firmware V2 was activated.
Explanation
Firmware successfully activated.
Severity
Notice
Facility local0
Standard
IEC 62443-3-3 Reference: SR 7.4
Message text
{Protocol}: Firmware activation failed.
Example WBM: Firmware activation failed.
Explanation
Firmware activation failed.
Severity
Error
Facility
local0
Standard
IEC 62443-3-3 Reference: SR 7.4