Configuring with the WBM
7.3 The menu items of the WBM
SIMATIC RF185C, RF186C, RF188C, RF186CI, RF188CI
84 Operating Instructions, 04/2020, C79000-G8976-C512-03
The "PLC" tab
The "PLC" tab is divided into the following area:
● Basic settings
Figure 7-9 The "Settings - Communication" menu item, "PLC" tab
Basic settings
Select the check box "Disable S7/PNIO" if you want to ensure that no access to the
communication module takes place via the controller (STEP 7). With this setting, the
Ethernet interface is closed for communication with the controller.
Select the check box "Disable EtherNet/IP" if you want to ensure that no access to the
communication module takes place via EtherNet/IP. With this setting, the Ethernet interface
is closed for EtherNet/IP communication with the controller.
To Next Page
Loading...
