Siemens SIMATIC S5 Series User Manual

2
2-8
Working with S5-DOS/ST
C79000-G8576-C760-03
2.3 Installing STEP 5 Drivers
The program S5DRV.EXE can be found on PG 7xx programming
devices in the subdirectory
– DR:\STEP5\S5_ST\INSTALL.
S5DRV.EXE offers the the following options:
1. Loading or not loading drivers for EPROM, H1 and L2
network functions.
2. Language selection and deselection for STEP 5, V 6.6 when
more than one language is installed.
3. Selection between internal and external EPROM interface
modules (see also Installing EPROM Drivers):
– Internal EPROM programming interface (only in PG 7xx
programming devices)
– Parallel external Prommer on an LPT port
– Serial Prommer on a COM port (only on PCs)
STEP 5 /ST V 6.6
EPROM, H1, L2 – Load drivers
EPROM driver
H1 driver for CP 141
H1 driver for CP 1413
L2 driver for CP 5410B
[X]
[ ]
[ ]
[ ]
Help Select
PROMMER
Language Cancel End
1
F
2
F
3
F
4
F
5
F
8
F
7
F
6
F
Loading driver
Loading Drivers
Installing and Starting Up

Siemens SIMATIC S5 Series Specifications

General

Series	SIMATIC S5
Manufacturer	Siemens
Category	Controller
Programming Language	STEP 5
Modular Design	Yes
Power Supply	24V DC
Communication Interfaces	RS-232, RS-485
Memory Type	EPROM, RAM
Digital Inputs/Outputs	Varies depending on module configuration
Analog Inputs/Outputs	Varies depending on module configuration
CPU Type	Varies by model
Memory	Varies by model
Operating Temperature	0°C to 60°C