Siemens SIMATIC S5 Series User Manual

2
2-9
Working with S5-DOS/ST
C79000-G8576-C760-03
 The network drivers for the H1 and L2 buses are not loaded.
 All installed language versions of STEP 5 are activated.
 PG: the EPROM driver for the internal EPROM programming
interface is loaded.
 PC: the driver for the parallel external Prommer is loaded.
Note
Loaded drivers (for example, EPROM driver) reduce the working
memory available to STEP 5. To make more space available in the
working memory, you should not load the EPROM driver unless
you need it.
Start the program S5DRV.EXE as follows:
MS-DOS:
 Type in the command S5DRV.
Windows:
 Start the program by double-clicking on the icon STEP 5
Drivers in the STEP 5 program group window.
The program S5DRV.EXE is menu-driven. You can work through
the program using either a mouse or trackball, if you have one
connected, or the function keys.
Defaults
Procedure
Installing and Starting Up

Siemens SIMATIC S5 Series Specifications

General

Series	SIMATIC S5
Manufacturer	Siemens
Category	Controller
Programming Language	STEP 5
Modular Design	Yes
Power Supply	24V DC
Communication Interfaces	RS-232, RS-485
Memory Type	EPROM, RAM
Digital Inputs/Outputs	Varies depending on module configuration
Analog Inputs/Outputs	Varies depending on module configuration
CPU Type	Varies by model
Memory	Varies by model
Operating Temperature	0°C to 60°C