iii
Working with S5-DOS/ST
C79000-G8576-C760-03
Preface
The STEP 5, V 6.6 sofware package runs under MS-DOS. STEP
5 can be started under MS-DOS or from Windows.
The package installed on your PG not only contains the STEP 5
application but also the program S5DRV.EXE for installing
drivers and other programs.
This manual explains the software configurations within which
STEP 5 and the appropriate applications and drivers (networks)
can be run under MS-DOS or Windows.
Special hardware configurations and utilities required or useful
with STEP 5 are also described.
The operating systems MS-DOS and Windows are not described
in this manual.
The manual also contains chapters that are only of interest if you
want to use a personal computer (PC) as a programming device
(PG). If you order STEP 5 as a retrofit kit, note that different
software packages are necessary for PCs and PGs. The functions
provided by the packages are nevertheless the same.
You do not need to read this manual from cover to cover. Have a
look at the list of contents or the index to see what you need to
read to find the solution for your problem or task.
Software Package
STEP 5, V 6.6
Content of the
Manual
To Next Page
Loading...
Need help?
General
