6
6-14
Working with S5-DOS/ST
C79000-G8576-C760-03
Note
If more than 372 objects are contained in the set path (the sum of
files and subdirectories), you will be given the error message
more than 372 files to transfer
In this case only the first 372 files/directories (taken
alphabetically) will be displayed and processed. The limit of 372
does not apply to the number of files/directories in subdirectories.
Remedy
Set the path for “Preset drives” at the highest level in the directory
structure hierarchy
e.g. instead of
D:\TEST
set the root directory
D:\
Select “Send mode/Receive mode” and deselect all
files/directories apart from the one required (in the above example
\TEST) by using F5 in the Transfer menu.
Start the transfer with ALT + F1.
File Transfer
To Next Page
Loading...
