6
6-13
Working with S5-DOS/ST
C79000-G8576-C760-03
Note
With FTARC, drives A: through P: can be addressed, assuming
they exist.
Press the function key F8 to validate your selections and return to
the main menu.
The send and receive modes are both described here because the
operator input is very similar for both functions.4.
In both cases you can:
transfer some or all of the files you selected in the main menu,
exclude (deselect) certain files from the transfer,
start the transfer of the required files,
abort the transfer before it is complete.
Some or all of the files which were entered in the field Filename
specification are transferred from the local drive to the remote
drive. (Sending from the local device to the remote device.)
Some or all of the files which were entered in the field Filename
specification are transferred from the remote drive to the local
drive. (Receiving from the remote device to the local device.)
If the drive/path for the local or remote device is not set as
required, you can modify this setting via F8 (Return to main
menu) and F5 (Preset drives).
Return to Main
Menu
Send Mode and
Receive Mode
What is the Send
Mode?
What is the
Receive Mode?
File Transfer
To Next Page
Loading...
