EasyManuals Logo

Siemens SIMATIC S7-300 Module data Technical Data

Siemens SIMATIC S7-300 Module data
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
Technical data of CPU 31x
7.1 General technical data
CPU 31xC and CPU 31x, Technical data
7-2 Manual, Edition 08/2004, A5E00105475-05
7.1.2 Technical data of the Micro Memory Card (MMC)
Plug-in SIMATIC Micro Memory Cards
The following memory modules are available:
Table 7-1 Available MMCs
Type Order number Required for a firmware update via MMC
MMC 64k 6ES7 953-8LFxx-0AA0
MMC 128k 6ES7 953-8LGxx-0AA0
MMC 512k 6ES7 953-8LJxx-0AA0
MMC 2M 6ES7 953-8LLxx-0AA0 Minimum requirement for CPUs without DP interface
MMC 4M 6ES7 953-8LMxx-0AA0 Minimum requirement for CPUs with DP interface
MMC 8M
1
6ES7 953-8LPxx-0AA0
1
This MMC cannot be used together with CPU 312C or CPU 312.
Maximum number of loadable blocks in the MMC
The number of blocks that can be stored on the MMC depends on the capacity of the MMC
being used. The maximum number of blocks that can be loaded is therefore limited by the
capacity of your MMC (including blocks generated with the "CREATE DB" SFC):
Table 7-2 Maximum number of loadable blocks on the MMC
Size of MMC Maximum number of blocks that can be loaded
64 KB 768
128 KB 1024
512 KB
2 MB
4 MB
8 MB
Here the maximum number of blocks that can be loaded for the
specific CPU is less than the number of blocks that can be stored on
the MMC.
Refer to the corresponding specifications of a specific CPU to
determine the maximum number of blocks that can be loaded.

Table of Contents

Other manuals for Siemens SIMATIC S7-300 Module data

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC S7-300 Module data and is the answer not in the manual?

Siemens SIMATIC S7-300 Module data Specifications

General IconGeneral
SeriesS7-300
ManufacturerSiemens
Protection ClassIP20
SystemSIMATIC S7-300
Digital InputsVaries by module
Digital OutputsVaries by module
Analog InputsVaries by module
Analog OutputsVaries by module
Central Processing UnitVaries by CPU model
Supply Voltage24V DC or 120/230V AC
CPU TypeVaries (e.g., CPU 312, CPU 315, etc.)
MemoryVaries by CPU model
Communication InterfacesMPI, PROFIBUS
Programming LanguagesLAD, FBD, STL, SCL, GRAPH
Operating Temperature0°C to 60°C
Storage Temperature-40°C to 70°C
Relative Humidity10% to 95% (non-condensing)

Related product manuals