Siemens SIMATIC S7-300 Module data Technical Data

Appendix
A.1 Information about upgrading to a CPU 31xC or CPU 31x
CPU 31xC and CPU 31x, Technical data
Manual, Edition 08/2004, A5E00105475-05
A-3
Note
If you are using SFC 56 "WR_DPARM" or SFC 57 "PARM_MOD", you should always
evaluate the SFC's BUSY bit.
• SFC 13 "DPNRM_DG"
On CPUs 312 IFM to 318-2 DP, this SFC always works "quasi synchronously" when it is
called in OB82. On CPUs 31xC/31x it generally works asynchronously.
Note
In the user program, the job should merely be started in OB 82. The data should be
evaluated in the cyclical program, taking account of the BUSY bits and the value returned
in RET_VAL.
Hint
If you are using a CPU 31xC/31x, we recommend that you use SFB 54, rather than SFC
13 "DPNRM_DG".
SFC 20 "BLKMOV"
In the past, this SFC could be used with CPUs 312 IFM to 318-2 DP to copy data from a non
runtime-related DB.
SFC 20 no longer has this functionality with CPUs 31xC/31x. SFC83 "READ_DBL" is now
used instead.
SFC 54 "RD_DPARM"
This SFC is no longer available on CPUs 31xC/31x. Use SFC 102 "RD_DPARA" instead,
which works asynchronously.

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)