Siemens SIMATIC S7-300 Module data Technical Data

Memory concept
4.2 Memory functions
CPU 31xC and CPU 31x, Technical data
Manual, Edition 08/2004, A5E00105475-05
4-13
4.2.3.3 Deleting blocks
Deleting blocks
When you delete a block, it is deleted from load memory. In STEP 7, you can also delete
blocks with the user program (DBs also with SFC 23 "DEL_DB"). RAM used by this block is
released.
4.2.3.4 Compressing blocks
Compressing blocks
When data are compressed, gaps which have developed between memory objects in load
memory/RAM as a result of load/delete operations will be eliminated. This releases free
memory in a continuous block. Data compression is possible when the CPU is in RUN or in
STOP.
4.2.3.5 Promming (RAM to ROM)
Promming (RAM to ROM)
When writing the RAM content to ROM, the actual values of the DBs are transferred from
RAM to load memory to form the start values for the DBs.
Note
This function is only permitted when the CPU is in STOP mode. Load memory is cleared if
the function could not be completed due to power loss.
4.2.4 CPU memory reset and restart
CPU memory reset
After the insertion/removal of a Micro Memory Card, a CPU memory reset restores defined
conditions for CPU restart (warm start). A CPU memory reset rebuilds the CPU's memory
management. Blocks in load memory are retained. All dynamic runtime blocks are
transferred once again from load memory to RAM, in particular to initialize the data blocks in
RAM (restore initial values).

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)