EasyManuals Logo

Siemens SIMATIC S7-300 Module data Technical Data

Siemens SIMATIC S7-300 Module data
244 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #238 background imageLoading...
Page #238 background image
Glossary
CPU 31xC and CPU 31x, Technical data
Glossary-22 Manual, Edition 08/2004, A5E00105475-05
Token
Allows access to the bus for a limited time.
Topology
Structure of a network. Common structures include:
Bus topology
Ring topology
Star topology
Tree topology
Transmission rate
Data transfer rate (in bps)
Twisted Pair
Fast Ethernet via twisted-pair cables is based on the IEEE 802.3u standard (100 Base-TX).
The transmission medium is a 2x2 wire, twisted and shielded cable with a characteristic
impedance of 100 ohms (AWG 22). The transmission characteristics of this cable must meet
the requirements of category 5 (see glossary).
The maximum length of the connection between end device and network component must
not exceed 100 m. The ports are implemented according to the 100 Base-TX standard with
the RJ-45 connector system.
Ungrounded
Having no direct electrical connection to ground
User memory
User memory contains the code blocks / data blocks of the user program. User memory can
be integrated in the CPU, or stored on plug-in Memory Cards or memory modules. However,
the user program is principally processed from the RAM of the CPU.
User program
In SIMATIC, a distinction is made between the operating system of the CPU and user
programs. The user program contains all instructions and declarations, as well as signal
processing data that can be controlled by the plant or the process. It is assigned to a
programmable module (for example CPU or FM) and can be structured in smaller units
(blocks).
See Operating system
See STEP 7
Varistor
Voltage-dependent resistor

Table of Contents

Other manuals for Siemens SIMATIC S7-300 Module data

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC S7-300 Module data and is the answer not in the manual?

Siemens SIMATIC S7-300 Module data Specifications

General IconGeneral
SeriesS7-300
ManufacturerSiemens
Protection ClassIP20
SystemSIMATIC S7-300
Digital InputsVaries by module
Digital OutputsVaries by module
Analog InputsVaries by module
Analog OutputsVaries by module
Central Processing UnitVaries by CPU model
Supply Voltage24V DC or 120/230V AC
CPU TypeVaries (e.g., CPU 312, CPU 315, etc.)
MemoryVaries by CPU model
Communication InterfacesMPI, PROFIBUS
Programming LanguagesLAD, FBD, STL, SCL, GRAPH
Operating Temperature0°C to 60°C
Storage Temperature-40°C to 70°C
Relative Humidity10% to 95% (non-condensing)

Related product manuals