Siemens Simatic S7-400 Installation Manual

Installing the S7-400
2-6
Automation System S7-400 Hardware and Installation
A5E00850741-01
2.2 Installing the Central Rack (CR) and Expansion Rack
(ER)
Function of the Racks
The racks of the S7-400 system form the basic framework which accepts the
individual modules. The modules exchange data and signals and are powered via
the backplane bus. The racks are designed for wall mounting, for mounting on rails,
and for installation in frames and cabinets.
Racks in the S7-400 System
Rack
No. of
Slots
Available
Buses
Application Characteristics
UR1 18
I/O bus
C
o
m
m
u
n
i
c
a
t
i
o
n
CR
o
r
R
a
c
k
f
o
r
a
l
l
m
o
d
u
l
e
t
y
p
e
s
i
n
t
h
e
S
7
4
0
0
UR2 9
Communication
bus
or
ER
Rack
f
or all module types in the S7-400.
ER1 18
Restricted I
/
O
E
R
s
Racks for signal modules (SMs), receive
IMs, and all power supply modules.
The I/O bus has the following restric-
tions:
• Interrupts from modules have no
effect because no interrupt lines
exist.
• Modules are not su
p
p
lied with 24
V
,
ER2 9
R
e
s
t
r
i
c
t
e
d
I
/
O
bus
ERs
M
o
d
u
l
e
s
a
r
e
n
o
t
s
u
p
p
l
i
e
d
w
i
t
h
2
4
V
,
i.e. modules requiring 24 V cannot
be used (see technical data of the
modules).
• Modules are neither backed up by
the battery in the power supply
module nor by the voltage applied
externally to the CPU or receive IM
(EXT.BATT. socket).
C
R
2
1
8
I/O bus,
se
g
mented
Se
g
mented
Rack for all module types in the S7-400
except receive IMs.
CR2 18
s
e
g
m
e
n
t
e
d
Communication
bus, continuous
S
e
g
m
e
n
t
e
d
CR
p
The I/O bus is subdivided into 2 I/O bus
segments of 10 and 8 slots respectively.
CR3 4
I/O bus
Communication
bus
CR in standard
systems
Racks for all S7-400 module types ex-
cept receive IMs. CPUs 41x-H only in
stand-alone operation.
UR2-H 2*9
I/O bus,
segmented
Communication
bus, segmented
Subdivided CR or
ER for compact in-
stallation of a fault--
tolerant system
Rack for all S7-400 modules except
send IMs.
The I/O bus and communication bus are
divided into 2 bus segments, each with 9
slots.

Siemens Simatic S7-400 Specifications

General

Programming Language	STEP 7 (LAD, FBD, STL, SCL, GRAPH)
Communication Interfaces	MPI, PROFIBUS
Power Supply	24 V DC, 120/230 V AC (Power supply modules are separate and chosen based on system requirements)
Operating Temperature	0°C to 60°C
Mounting	Rack mounting
Processor	CPU 412-1, CPU 414-2, CPU 416-2, CPU 417-4 (Different CPUs offer varying performance and features)
Relative Humidity	5 to 95% (non-condensing)