Siemens SINAMICS G120P Manual

4 Operating the Application
4.4 Operator Control and Monitoring via monitoring table
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
28
Copyright  Siemens AG 2018 All rights reserved
No.
Action
Remarks
2.
Go online.
3.
For changing a value, you enter it in
the “Control value” column in the
respective line and tick the checkbox
on the right and start the process
with in the header.
For changing a Boolean tag you can
also proceed as follows:
Right-click the respective line and go to
“Control” (see picture).

Siemens SINAMICS G120P Specifications

General

Frequency Range	0 Hz to 550 Hz
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V, 380 V to 480 V, 500 V to 690 V
Output Voltage	0V to input voltage
Control Type	Vector control, V/f control
Protection Class	IP20, IP55
Communication Interfaces	PROFIBUS, PROFINET, Modbus RTU
Cooling Method	Air cooling
Altitude	Up to 2000 m without derating
Power Range	0.37 to 630 kW