Siemens SINAMICS G120P Manual

3 Setting up and commissioning the application
3.1 Wiring
SINAMICS G120 DP at S7-1200
Entry-ID: 70155469, V1.4, 07/2018
9
Copyright  Siemens AG 2018 All rights reserved
3 Setting up and commissioning the
application
3.1 Wiring
The figure below shows the hardware setup of the application.
Figure 3-1: Wiring
L1
L2
L3
N
PE
M
Y
L1 L2 L3 PE
U2 V2 W2 PB
L+ M PE L1 N PE L+ M
PB LAN
LAN M L+
24 V DC
SINAMICS
G120C DP
SIMATIC Panel
KTP600
SIMATIC S7
CPU 1212C
Note
Note the setup guideline in the manuals of the respective devices (see /1/, /4/, /6/).

Siemens SINAMICS G120P Specifications

General

Frequency Range	0 Hz to 550 Hz
Ambient Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Relative Humidity	5% to 95% (non-condensing)
Voltage Range	200 V to 240 V, 380 V to 480 V, 500 V to 690 V
Output Voltage	0V to input voltage
Control Type	Vector control, V/f control
Protection Class	IP20, IP55
Communication Interfaces	PROFIBUS, PROFINET, Modbus RTU
Cooling Method	Air cooling
Altitude	Up to 2000 m without derating
Power Range	0.37 to 630 kW