Siemens SINAMICS S120 - Page 234

Gearbox
9.3 Motors with helical and bevel gearboxes
Synchronous Motors 1FK7
234 Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1
Order codes for 1FK7 servo gear motors
Order no. for geared motor + order codes
1FK7...-.5A.71-1..5 - Z @@@ G @@ H @@
1st order code, Gear type
• Bevel gear unit K 102 to K 813 B
• Offset shaft gear unit F 202 to F 602 C
• Helical gear unit C 002 to C 812 D
• Worm gear unit S 002 to S 402 E
For complete order code for gear type, see selection and ordering data on pages 3/64 to 3/85
2nd order code, 1st and 2nd positions: Type
• Foot-mounted G 1
• Tapped hole group G 2
• Flange (round) G 3
• Foot-mounted and flange (round) G 5
• Foot-mounted and tapped hole group G 6
2nd order code, 3rd position: Gear unit shaft end
Helical gear unit: Offset shaft gear unit: For bevel and worm gearboxes:
• Solid shaft with fitted key • Solid shaft with fitted key, gearbox side 5 • Solid shaft with fitted key, gearbox side 4 1
• Hollow shaft with keyway,
insertion gearbox side 5
• Hollow shaft with keyway,
insertion gearbox side 4
3
• Hollow shaft with tensioning element,
shrink disk, side 6,
insertion gearbox side 5
• Hollow shaft with tensioning element,
shrink disk, side 4,
insertion gearbox side 3
4
• Solid shaft with fitted key, gearbox side 3 5
• Hollow shaft with keyway,
insertion gearbox side 3
7
• Hollow shaft with tensioning element,
shrink disk, side 3,
insertion gearbox side 4
8
3rd order code, 1st and 2nd positions: Type of construction/mounting position
Type of construction for Mounting position for
Helical gear unit: Offset shaft, bevel and worm gearboxes:
• IM B3 / IM B5 / IM B14 / IM B34 / IM B35 • EL 1 H 1
•IM B7 • EL 2 H 2
•IM B8 • EL 3 H 3
•IM B6 • EL 4 H 4
•IM V1 • EL 5 H 5
• IM V3 / IM V6 / IM V19 • EL 6 H 6
•IM V5 – H 7
• IM V18 – H 8
3rd order code, 3rd position: Connector attachment position
• Connector position on gearbox side 2 1
• Connector position on gearbox side 4 2
• Connector position on gearbox side 1 3
• Connector position on gearbox side 3 4