Commissioning via the SINAMICS V20 Smart Access
6.11 Diagnosing
SINAMICS V20 Converter
164 Operating Instructions, 10/2019, A5E34559884-012
Fault/alarm diagnostics
On this subpage, you can view the detailed fault/alarm information, acknowledge all faults, or
send all faults by e-mail (recommended on PC).
You can use the filter button to display all faults and alarms or the active ones only.
Displays the active faults and alarms only
Displays all faults and alarms
Note: The module does not read the up
dates of active faults or alarms from the converter until you
collapse all faults and alarms.
For more information about the maximum number of faults/alarms that can be recorded, see
parameters r0947/r2110 in Section "Parameter list (Page 198)".
To Next Page
Loading...
