Commissioning via the SINAMICS V20 Smart Access
6.12 Backing up and restoring
SINAMICS V20 Converter
Operating Instructions, 10/2019, A5E34559884-012
167
Open the backup & restore Web page by selecting the backup & restore icon from ei-
ther the home page or the navigation sidebar.
ws to back up the selected parameter file to SINAMICS V20 Smart
Character restrictions for the file name: maximum 30 characters which are limited to A
-
-z, 0-9, _, -, (, ), dot, or space. If an existing backup file has the same name as the
new file you desire to back up, a message prompts asking you if you want to o
verwrite
When you perform the backup operation on a mobile device, if the menus and buttons
on the Web page disappea
r after you finish editing the backup file name, you can click
in the blank area of the Web page to restore them.
When the following window appears, proceed as follows to complete the backup pro-
cess. If the Web page indicates that the backup
fails, you can select to back up again.
Note that download to your local drive (recommended on PC) is only an optional step
.
If you attempt to download from the V20 Web page via the supported Internet Explorer
Web browser, the V20 Web page then opens the f
ile. You must save the backed-
up file
to your local drive manually.
To Next Page
Loading...
