Siemens SINAMICS V20

Commissioning via the SINAMICS V20 Smart Access
6.13 Upgrading
SINAMICS V20 Converter
172 Operating Instructions, 10/2019, A5E34559884-012
Basic upgrading
1.
Open the following Web site and click "Sales
release for
SINAMICS V20 Smart Access
VXX.XX.XX" (VXX.XX.XX represents the firmware version number of the V20 Smart
Access) to download the target upgrade file (*.bin file) to your local drive (recommend-
ed on PC):
https://support.industry.siemens.com/cs/ww/en/ps/13208/pm
2.
Power off SINAMICS
V20 Smart Access by sliding its power switch to "OFF". Keep the
reset button pressed and then slide the power switch to "ON".
3.
Open the following Web site specific for basic upgrading:
http://192.168.1.1/factory/basicupgrade.html
4.
Proceed as follows:
5.
Restart the SINAMICS V20 Smart Access.
6.
Clear the Web browser cache.
7.
Refresh your Web application.
Note
Refresh the basic upgrading page if the connection status unexpectedly becomes
"Disconnected" during upgrading.