Introduction
2.1 Converter variants
SINAMICS V20 Converter
20 Operating Instructions, 10/2019, A5E34559884-012
Output current
at 480 V at
4kHz/40°C
FSB
(with single fan)
FSC
5.5 kW 15.2 A 12.5 A 11 A 6SL3210-5BE25-5UV0 6SL3210-5BE25-5CV0
FSD
(with two fans)
FSE
(with two fans)
18.5 kW (HO)
2)
6SL3210-5BE31-8UV0 6SL3210-5BE31-8CV0
22 kW (LO)
22 kW (HO)
6SL3210-5BE32-2UV0 6SL3210-5BE32-2CV0
30 kW (LO)
This variant refers to the Flat Plate converter with a flat plate heatsink.
"HO" and "LO" indicate high overload and low overload respectively. You can set the HO/LO mode through relevant
Single phase AC 230 V variants
The single phase AC 230 V converters are available in the following frame sizes.
FSAA
(without fan)
0.25 kW 4.5 A 1.7 A 6SL3210-5BB12-5UV1 6SL3210-5BB12-5BV1
FSAB
(without fan)
0.55 kW 7.7 A 3.2 A 6SL3210-5BB15-5UV1 6SL3210-5BB15-5BV1
FSAC
(with single fan)
FSAD
(with single fan)
2.2 kW 27.2 A 11 A 6SL3210-5BB22-2UV1 6SL3210-5BB22-2BV1
FSC
(with single fan)
2.2 kW 27.2 A 11 A 6SL3210-5BB22-2UV0 6SL3210-5BB22-2AV0