Siemens SINAMICS V20

Options and spare parts
B.1 Options
SINAMICS V20 Converter
366 Operating Instructions, 10/2019, A5E34559884-012
Mounting (SINAMICS V20 + BOP Interface Module + external BOP)
Note
Connecting the BOP Interface Module to the external BOP is required only when you desire
to control the converter operation remotely with the external BOP.
The BOP Interface Module
needs to be screwed to the converter with a tightening torque of 1.5 Nm (to
lerance: ± 10%).
Note
Make sure that you connect the cable shield to the shield connection kit. For more
information about the shielding method, see Section "
EMC-compliant installation (Page 48)".