Configuring with Web Based Management
4.9 Security
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
101
Making the IPsec settings
Requirement for changing the IPsec VPN settings
The user has been assigned the right "Edit system parameters".
In the navigation, select "Security > VPN basic settings" and the IPsec tab.
Configuring the basic setting
Configure the following settings that are valid for all IPsec VPN profiles after you have saved:
When activated, IPSec is used.
Shows whether IPsec is enabled or disabled.
Interval after DPD query
Period after which DPD queries are sent. These queries test whether or
not the remote station is still reachable.
Timeout after after DPD
If there is no response to the DPD query, the VPN connection to the re-
mote station is declared to be invalid after this time interval has elapsed.
Interface The interface is the local endpoint of the VPN connection. Via this inter-
face the VPN connection to the VPN partner (SINEMA RC client, device)
is established.
• WAN: Connection only via the WAN interface
• LAN 1-n: Connection via available LAN interfaces:
• WAN + LAN 1-n: Connection via all interfaces
The devices and users are assigned IPsec profiles The profiles contain the settings of phase
1 and phase 2.
In the navigation, select "Security > VPN basic settings" and the "IPsec profile" tab.
To Next Page
Loading...
