Siemens SINEMA Remote Connect - Managing Licenses

Configuring with Web Based Management
4.6 System
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
57
4.6.5
Managing licenses
On this page you obtain an overview of the existing licenses. You can also activate new
license packages and deactivate existing licenses. You will find an overview of the available
licenses in the section "License information (Page 20)".
Calling the Web page
In the navigation, select "System > Licenses".
Displayed entries
A list of the existing licenses is displayed:
Box
Meaning
License type
Name of the license package
License number License number used when the license was activated.
Activation date
Date on which the license was activated.
License value Number of currently activated participants and how many participants can be
configured in total.
Status
• Active: The license is activated and is being used.
• Locked: The license is invalid or damaged, e.g. if you have changed the
hardware equipment.
Actions You obtain an overview of the license information. This is also displayed
for users with the right "read only".
Online license
Activating the online license
Requirements
● There is a connection to the Internet.
● A valid DNS server is configured. You configure the DNS server in "System > Network >
"DNS".
Procedure
1. Click the "Activate license" button.
2. In the following dialog, enter the license number belonging to the online license.
3. Click the "Activate" button to confirm the online license.
Result
The system checks whether the license number is valid and which license package is
activated.
The license is activated and is displayed in the overview of the existing licenses.