Siemens SINEMA Remote Connect - B Appendix B; Enabling the E-Mail Address

SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
115
Appendix B
B
B.1
Enabling the e-mail address
To receive the e-mail, with some network providers the e-mail address for the recipient of the
SMS message first needs to be enabled.
To enable the e-mail address, you normally send a special activation text to an abbreviated
number of your network provider. You will find several examples in the following table
"Activation and deactivation SMS".
You will receive a reply SMS with the e-mail address that is made up of the phone number
and the SMS gateway name of your network provider, for example:
0123412345678@providersms.com
Note
Check with your network provider whether or not it is necessary to send activation and
deactivation SMS messages. Your network provider will inform you of the texts an
d short
number.
Table B- 1 Activation and deactivation SMS (examples)
E-Plus
O
2
Germany
T-Mobile
Vodafone
SMS gateway name
smsmail.eplus.de
o2online.de
t-mobile-sms.de
vodafone-sms.de
Enabling
Send SMS with text
to short number
Text: START
Short number:
7676245
Text: OPEN
Short number:
6245
Text: OPEN
Short number:
8000
Text: OPEN
Short number:
3400
Deactivating
Send SMS with text
to short number
Text: STOP
Short number:
7676245
Text: STOP
Short number:
6245
Text: CLOSE
Short number:
8000
Text: CLOSE
Short number:
3400
See also
SMS (Page 53)