Siemens SINEMA Remote Connect - Installing SINEMA RC Server

Installation and commissioning
3.2 Installing SINEMA RC Server
SINEMA Remote Connect - Server
26 Operating Instructions, 11/2017, C79000-G8976-C383-04
3.2
Installing SINEMA RC Server
Note
Keyboard layout during installation
During installation the keyboard layout "English (USA, International)" is set.
Note
To install SINEMA RC V1.3 Server, note the following:
•
No system installed: Perform a new installation.
•
SINEMA RC Server V1.2 pre-
installed: Perform an update using the DVD for SINEMA RC
Server, see section "System update V1.2 > V1.3".
•
SINEMA RC Server V1.0 or V1.1 pre-installed: First, update the version of SINEMA RC
Server to V1.2 from the "
System update (Page 59)" WBM page and to version 1.3 using
the DVD. The update must be performed in the correct order: V1.0 > V1.1 > V1.2 > V1.3
Requirement
● In the startup order, the CD/DVD is set as the first boot medium.
● The hardware requirements are met.