Siemens SINEMA Remote Connect - Overview of functions

Application and properties
1.2 Overview of functions
SINEMA Remote Connect - Server
12 Operating Instructions, 11/2017, C79000-G8976-C383-04
1.2
Overview of functions
Configuring the SINEMA Remote Connect server
The SINEMA RC Server can be configured via a Web Based Management (WBM).
Configuration of the SINEMA RC Server
In the WBM, you can use the following functions:
● Basic settings of the system
– Settings of the system and address parameters
– Language of the WBM
● Specifying users, groups and their rights
– Creation of users and devices including password assignment
– Creation and assignment of roles and rights
– Assignment of participant groups
● Configuration of connections
– Creation of communication relations between the participant groups
Commissioning/configuration of end devices
● You can create partial configurations globally for the end devices. This includes, for
example, configuration of NAT etc.
● Via the server, configuration information can be loaded on the end device.
Management of the server
● Changing settings of the system or participants
● Activating / deactivating connections between participants
Connection management
● Display of all connections available online and offline
● Connection configuration with creation of certificates
● Establishment and termination of connections
● Sending a wake-up SMS message to a device, for example to establish a secure
connection