Siemens SINEMA Remote Connect - Dns

Configuring with Web Based Management
4.6 System
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
51
4.6.2.2
DNS
VPN clients can also reach the SINEMA RC Server using a host name. To do this, specify a
host name, e.g. sinemarc.example.org
For the name resolution, specify the DNS server. This setting is adopted in the VPN
configuration of the clients.
The setting is also required for licensing.
Calling the Web page
In the navigation panel, select "System > Network configuration" and the "DNS" tab.
Creating a new DNS server
Make the following settings and then click the "Save" button:
Box
Meaning
Hostname Enter the host name under which SINEMA RC can be reached, e.g.
sinemarc.example.org
Externally resolvable host
name
When activated, the host name is included in the VPN configuration
and in the configuration of the VPN clients.
Primary DNS server
Enter the IPv4 address of the primary DNS server.
Secondary DNS server Enter the IPv4 address of the secondary DNS server that is then
used if the primary DNS server is not reachable.