Siemens SINEMA Remote Connect - Configuring with Web Based Management; Opening Web Based Management

SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
35
Configuring with Web Based Management
4
4.1
Opening Web Based Management
Calling the start page of the WBM
1. Open the Web browser.
2. In the address bar of the browser enter
https
://
<
IP address>. You specify the IP address
during installation.
If you use a port other than 443 as the HTTPS standard port, enter the port number along
with the IP address. A colon ":" must be entered between the IP address and the port
number as a delimiter e.g.: https://192.168.234.1:6443.
Note
You set the port for access to the Web server in the "System > Network configuration >
Web server settings" tab.
Result
The start page of the WBM opens.