Configuring with Web Based Management
4.9 Security
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
95
Device certificate
Calling the Web page
In the navigation panel, "Security > Certificate management" select the "Device certificate"
tab.
In the "Device certificate" tab, you can see an overview of the imported certificates:
Type Type of the loaded file. For more information, refer to the section Overview of certificate
Common name Name of the applicant
Display of whether the certificate is valid or has already expired.
Display of the owner obtained from the common name (CN).
Display of the certification authority that issued the certificate.
Date from which the certificate is valid.
Date on which the certificate expires.
The function that uses the certificate.
Importing device certificates
1. To import device certificates click the "Import" button.
2. Select the PKCS12 file (*.p12) and confirm your selection with the "Open" button.
3. The files are password protected. To load the files on the device, enter the password and
repeat the input.
4. Click the "Next" button. Details of the CA certificate are displayed on the "Activate
certificate" tab. You can, for example, check whether the certificate is still valid.
Serial number Number to identify the certificate. The serial number is automatically
incremented by one when the certificate is created.
Display of the certificate authority that issued the certificate.
Date from which the certificate is valid.
Date on which the certificate expires.
Specifies the key length being used.
Signature method Specifies which digital signature method with the corresponding sig-
nature key ("hash value") was used for the certificate.
5. To load the files on the SINEMA RC Server, click the "Import" button.
:
To Next Page
Loading...
