Siemens SINEMA Remote Connect - Changing the Current Password

Configuring with Web Based Management
4.10 My account
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
105
Renewing a user certificate
Note
Only renew valid certificates
You cannot renew a certificate that has already expired. If you attempt to renew an expired
certificate, the certificate authority will reject the request. When a certificate has already
expired, instead of renewing the existing cer
tificate, you need to request a new certificate.
With the "Renew" button, you can when necessary, e.g. with compromised certificates,
generate a new certificate.
To do this enter the relevant user password. The serial number is automatically incremented
by one.
Exporting a user certificate
In the "Exports" tab, you can download personal certificates. These include:
Box
Meaning
PKCS#12
Download a container in the Personal Information Exchange format (PFX).
PEM
Download certificate and key as Base64-coded ASCII text.
OVPN
Download OpenVPN configuration for user.
4.10.2
Changing the current password
Changing the current password
As a logged-on user, you can change your current password:
1. In the navigation, select "My account > Change password".
2. Enter the old password.
3. Enter the new password and confirm it.
The new must be at least 8 characters long and contain special characters, upper and
lowercase characters as well as numbers. See also the section "Permitted characters
(Page 21)".