Siemens SINEMA Remote Connect - Page 117

Appendix B
B.3 Structure of the csv file
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
117
Values to be set
The table contains the entries that you can enter in the csv file. For more detailed information
on these entries, refer to the section "Creating a new device (Page 68)" and device
information..
The entry ...
stands for ...
Device Name
Name of the device
GSM Number GSM number
Type
Device type
Vendor
Manufacturer
Location
Location
Type of connec-
tion
Type of connection
Enter the number for the relevant type of connection.
1 = permanent:
2 = digital input
3 = wake-up SMS
4 = digital input & wake-up SMS
Provider
Name of the SMS gateway provider
Comment
Comment
Group Participant group
The requirement is that the participant group has already been created.
Local subnet
Local LAN IP address
Network mask
Network mask of the local LAN IP address
Network gateway Device is a network gateway
If the device is a network gateway, enter "Yes".
Virtual subnet
Virtual subnet IP address
Network mask
Network mask of the virtual subnet IP address
Virtual subnet IP
address
Virtual subnet address
Local host
Local host
VPN donnection
mode
VPN connection mode
1 = OpenVPN: The connection will be established via OpenVPN.
2 = IPsec: The connection will be established via IPsec.
Ipsec profile Name of the IPsec profile
The requirement is that the IPsec profile has already been created.
Fixed IP
Fixed IP address for OpenVPN or IPsec connections