Application and properties
1.4 Configuration example
SINEMA Remote Connect - Server
16 Operating Instructions, 11/2017, C79000-G8976-C383-04
To be able to access a plant via a remote maintenance master station, follow the steps
below:
1. Establish the Ethernet connection between the device and the connected configuration
PC.
2. Establish a connection to the WAN.
3. Log the new device on to the SINEMA RC Server.
4. Set up the connection to the SINEMA RC Server on the device.
5. Put the new device into operation.
You will find instructions on the procedure in the Getting Started for SINEMA Remote
Connect.
To Next Page
Loading...
