Configuring with Web Based Management
4.6 System
SINEMA Remote Connect - Server
54 Operating Instructions, 11/2017, C79000-G8976-C383-04
In the navigation, select "System > SMS & E-mail > SMS gateway provider".
A list of the already existing SMS gateway providers is displayed. As default the data of four
network providers is already set
Name of the SMS gateway provider
Address Email address of the recipient of the SMS message
The e-mail address is generally made up of the call number of the SIM card and the
SMS gateway name. The requirement is that the e-mail address is activated,
"Activating the e-mail address (Page 115)"
Check with your network provider whether or not it is necessary to send an activa-
tion SMS message.
With the placeholder $SMS-NO the phone number the device is used automatically.
Sender num-
Identification that is transferred in the e-mail.
CC E-mail address of another recipient
The recipient receives only an e-mail. This could, for example, be a service techni-
cian who always wants to be informed when a certain device is woken.
Text $MSG - The message text of the wake-up SMS message is entered automatically.
Depending on the network provider either the text from the subject or the text box is
sent as the SMS message. You can obtain more detailed information on this from
Open the overview for changing the SMS gateway provider.
Creating an SMS gateway provider
1. Click the "Create" button.
2. In the following dialog, enter a name.
3. For address, enter the e-mail address of the recipient. For the phone number, use the
placeholder "$SMS-NO".
4. As the "Subject" or "Text" enter the placeholder "$MSG". This depends on your network
provider.
5. Click the "Create" button.
To Next Page
Loading...
