Siemens SINEMA Remote Connect - Page 85

Configuring with Web Based Management
4.8 User accounts
SINEMA Remote Connect - Server
Operating Instructions, 11/2017, C79000-G8976-C383-04
85
5. Configuring the VPN connection mode
Set the following parameters:
Field
Meaning
Request virtual IP
address
When enabled, a virtual IP address is requested during connection estab-
lishment.
Fixed IP address The IP address that is always assigned to the user.
This is only possible when the parameter "Activate fixed IP address space"
is enabled.
• OpenVPN: Remote connections > Address spaces > OpenVPN
OpenVPN connec-
tion parameters
Only necessary when the WAN IP address of the SINEMA RC Server is
translated with NAT.
• IP address of the connection
Enter the IP address via which the SINEMA RC Server can be reached.
• Port of the connection
Enter the port at which the SINEMA RC Server receives the OpenVPN
connection.
• IP protocol
Specify whether the OpenVPN connection goes via TCP or UDP.
• Actions
To delete, click on in the actions.
6. Creating participant groups
– Select one or more participant groups to which the device will be assigned. You will
find information on creating participant groups in the section " Creating participant
groups (Page 75)".
– Click the "Next" button.
7. Specifying the password
Enter a password and confirm it. The assigned password can be changed later by the
relevant user, refer to the section "Changing the current password (Page 105)".
8. Click the "Finish" button.