Technical Appendix
SINUMERIK 801 7-2
Start-Up
Data format
Number MD Name Reference
Unit Name, Miscellaneous Activated
HW /
function
Standard value Minimum value Maximum value Data type
General machine data
10240 SCALING_SYSTEM_IS_METRIC
– Basic system metric POWER ON
_always 1 *** *** BOOLEAN
14510 USER_DATA_INT [n]
kB User data (INT) 0 ... 31 POWER ON
– – 0 – DWORD
14512 USER_DATA_BIN [n]
kB User data (Binary) 0 ... 31 POWER ON
– 0 0 0xFF DWORD
Axis-specific machine data
30130 CTRLOUT_TYPE
– Output type of setpoint (setpoint branch): 0 POWER ON
_always 0 0 2 BYTE
30134 IS_UNIPOLAR_OUTPUT[0]
– Setpoint output is unipolar : 0 POWER ON
_always 0 0 2 BYTE
30200 NUM_ENCS
– Number of encoders (spindle with or without encoder) RESTART
1 0 1 BYTE
30240 ENC_TYPE
– Type of actual value acquisition (actual position value)
(encoder no.)
0: Simulation
2: Square–wave generator, standard encoder
(pulse multiplication)
3: Encoder for stepper motor
POWER ON
_always 0, 0 0 4 BYTE
30350 SIMU_AX_VDI_OUTPUT
– Output of axis signals with simulation axes POWER ON
_always 0 *** *** BOOLEAN
30600 FIX_POINT_POS
To Next Page
Loading...
