Tables
15.1 List of statements
Job planning
Programming Manual, 03/2006 Edition, 6FC5398-2BP10-1BA0
15-13
FALSE
Logical constant: Incorrect BOOL Can be
replaced
with integer
constant 0
FCTDEF Define polynomial function Is evaluated in
SYFCT or
PUTFTOCF.
FCUB
6
Feedrate variable according to cubic spline
(feed cubic)
Acts on feed
with G93 and
G94
m 37
FD Path feed for handwheel
override
(feed DRF)
Real, w/o
signs
S
FDA Axial feed for handwheel
override
(feed DRF axial)
Real, w/o
signs
S
FENDNORM Corner deceleration OFF m 57
FFWOF
1
Feedforward control OFF (feed forward OFF) m 24
FFWON Feedforward control ON (feed forward ON) m 24
FIFOCTRL Control of preprocessing buffer m 4
FIFOLEN Programmable preprocessing depth
FILEDATE Delivers date when file was last
accessed and written
STRING,
length 8
Format is
"dd.mm.yy"
FILEINFO Delivers sum of FILEDATE,
FILESIZE, FILESTAT and
FILETIME
STRING,
length 32
Format "rwxsd
nnnnnnnn dd.
hh:mm:ss"
FILESIZE Delivers current file size Type: INT in BYTES
FILESTAT Delivers file status of rights for
read, write, execute, display,
delete (rwxsd)
STRING,
length 5
Format is
"rwxsd"
FILETIME Delivers time when file was last
accessed and written
STRING,
length 8
Format is
"dd:mm:yy"
FINEA Motion end when "Exact stop fine" reached FINEA=... or
FINEA[n]=..
m
FL Speed limit for synchronized
axes
(feed limit)
Real, w/o
signs
The unit set
with G93, G94,
G95 is
applicable
(max. rapid
traverse)
FL[axis]=... m
FLIN
6
Feed linear variable (feed linear) Acts on feed
with G93 and
G94
m 37
FMA Feed multiple axial
Real, w/o
signs
m
FNORM
1,6
Feed normal to DIN 66025 m 37
FOCOF Deactivate travel with limited moment/force m
To Next Page
Loading...
Need help?
General
